大家好,今天小编关注到一个比较有意思的话题,就是关于维修热水器要注意什么事项的问题,于是小编就整理了3个相关介绍维修热水器要注意什么事项的解答,让我们一起看看吧。
热水器底座维修?
拆开电热管底座法兰上连接的各根电线,拧开正中间的固定法兰的大螺丝,将法兰及电热管总成往里推,稍稍偏转,将就着取出来。注意:在一只手拧下固定大螺丝时另一只手要捏住其他的螺杆或电接头,不可让电热管组件件掉进内胆里摔坏了,动作尽可能轻柔,不可损坏电热管及其他部件。
这时可以看出漏水的原因所在了,一般是电热管底座法兰上的密封圈破裂,接下来就是要换一个新的密封圈了。
电热水器更换镁棒后需要注意什么?
电热水器更换镁棒后就可以正常使用了。没有特别的要求,不过使用中避免将水温定的太高,可以减少镁棒更换频率。
电热水器中的镁棒,是作为牺牲阳极来减缓储水内胆腐蚀的部件需要定期更换。
现代关于造成金属腐蚀原因的理论中,比较占主流的一项,认为电化学反应是造成金属持续被腐蚀(生锈)的主要原因。这一理论认为不纯的金属跟电解质溶液接触时,会发生原电池反应,比较活泼的金属失去电子而被氧化,这种腐蚀叫做电化学腐蚀。制造热水器内胆的金属材料通常都属于不纯的金属材料,和水(电解质溶液)接触过程中,或多或少会发生腐蚀。
电化学反应有一个特点,就是被腐蚀的只会是原电池中的阳极。如果在电解质溶液加入一种更容易成为阳极的金属,腐蚀就会发生在这种金属上,从而保护金属不被腐蚀。而被加入的金属,称为牺牲阳极。热水器水箱中装入的镁棒,就是作为牺牲阳极存在的。
镁棒的使用时间和你电热水器容量、水质、用水量、使用温度高低等都有关系,一般1~3年左右更换一次。可根据更换时镁棒已使用的时间和被腐蚀的情况确定下一次更换的时间。
由于电化学反应程度和温度有关。当高于一定温度(约85℃)时反应会急剧上升。避免将水温定的太高,可以减少镁棒更换频率。实际上镁棒的价格不高,如果自己有一点动手能力的话,多换几次问题就都解决了。
另外,现在品牌热水器的内胆本身的抗腐蚀性能都不错,使用镁棒只是锦上添花,对于很多用户来说,热水器内胆的寿命是20年还是50年关系不大。
本科热水器故障说明书?
1、上水时必须将出水口打开,等内胆里的空气完全排出后才能检查水是否注满。
2、定期对花洒和隔水网清除余垢,保证出水通畅,而且对延长热水器的使用寿命有帮助。
3、不要用酸性或碱性的清洗液擦洗电热水器外壳,擦洗时应选择使用中性清洁剂
4、擦完后要用湿摸布轻轻擦干,清洁时要先关闭进线电源。
5、排空前必须先将电源切断。
6、使用中不得将水喷洒到空气开关或机身上,以免电器部件受潮 。
7、作封闭式安装时,加热期间进水阀必须处于开启状态。
8、若怀疑热水器中的水有可能结冰,则禁止给热水器接通电源。
9、在水压较大情况下,泄压阀可能有可能有水珠滴下,此属正常现象。严禁将泄压口堵塞,可用导流管引至安全下水道,并确保与大气相通。如自来水水压过大,建议在远离热水器处加减压阀。
10、刚打开阀门时,不要把出水方向对着人体。
11、法罗力电热水器出水口处不得连接非本公司提供的任何水阀、花洒,以免影响沐浴效果。
12、如热水器有故障、异常情况应及时拨打法罗力热水器维修电话报修。
13、若首次装机或遇停水情况,注意注满水后方可通电。
14、请勿自行拆卸机器,更换热水器上的零件。
到此,以上就是小编对于维修热水器要注意什么事项的问题就介绍到这了,希望介绍关于维修热水器要注意什么事项的3点解答对大家有用。